IBC Fill Caps

The breakdown of the specific parts of each part of the ton barrel:

1. The steel rod fixed with special screws can easily and quickly replace the inner container.
2. The inner container of our factory adopts UHMWPE one-time blow molding, anti-ultraviolet, anti-aging, easy to clean, non-toxic.
3. A volume scale is cast on the liner. The user can use the transparency of the container to clearly see the height of the liquid in the container.

The top feed port is equipped with a top cover, which can be blinded according to different customer devices or an outer cover with an imported vent valve. The lower discharge port is equipped with a DN50 ball valve, which can safely and quickly discharge the material.

IBC tank barrel is composed of: frame, tray, liner, top cover, valve, signage, corner protector, baffle, tie rod, elbow, adapter (optional).

The main raw material used in IBC barrels is high-density polyethylene (HDPE), which is an odorless, odorless, and non-toxic granular product. It has a good heat resistance and cold resistance, hardness, tensile strength, electrical insulation properties, and toughness are very good and has good chemical stability, is almost insoluble in any organic solvent at room temperature, resistant to many acids, The corrosion of alkali and salt solutions also has excellent resistance to environmental stress cracking and thermal stress cracking, with high surface hardness and good dimensional stability.

Size of IBC Top Lids With 2”Plastic Vented Bungs :6 inch and 9 inch(160 mm and 245 mm)

There are also one type vented cover with 2 holes:

Application of IBC tank lids:

IBC water tank lid is specifically designed for  IBC (Intermediate Bulk Container) or 270L,300L,1000L water tank. Qiming Packaging IBC lid is made of 100% new food grade HDPE. available in vented and non-vented configurations. 

Welcome your inquiry,please contact us at any time if you are interested in it!